View E3F2-R4B4-P1_7392215.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

photoelectric sensor e3f2 1 photoelectric sensor e3f2 threaded cylindrical photoelectric sensors with built-in amplifier for use as an optical proximity switch features ? m18 din-sized cylindrical housing housing materials: plastic, nickel plated brass and stainless steel axial and radial types (with integrated 90-optics) enclosure rating ip67 dc switching types with connectors for easy maintenance full metal plug-in type sensing distance separate types : 7 m, 10 m retroreflective polarizing types: 2 m, 4 m background suppression type: 10 cm long detection distance (0.3 m, 1 m) with sensitivity adjust- er for diffuse type wide-beam characteristics (10 cm) for diffuse type wide operating voltage range (10 to 30 vdc or 24 to 240 vac) short-circuit and reverse connection protection (dc switching type) ul and csa approved (ac switching types) ul listed (dc switching types)
2 photoelectric sensor e3f2 selection guide dc-switching models housing material: plastic note: standard cable length is 2 m. models provided with a 5 m long cable are available. when ordering, specify the cable length by adding the length of the cable (e.g. e3f2-r2rb4 2m or e3f2-r2rb4 5m). for other cable length please contact your omron sales representative. sensing method appearance connection sensing model method distance pnp output npn output through- beam multi purpose axial pre-wired 7 m e3f2-7b4 e3f2-7c4 m12 connector e3f2-7b4-p1 e3f2-7c4-p1 - precision detection (*1) - test input (*1) with slit e39-es18 pre-wired 10 m e3f2-10b4 e3f2-10c4 m12 connector e3f2-10b4-p1 e3f2-10c4-p1 retro- reflective (incl. reflector e39-r1 or e39-r1s) non-polarizing (without msr function) axial pre-wired 0.1 - 2 m (*2) (*2) with reflector e39-r1 e3f2-r2b4 e3f2-r2c4 m12 connector e3f2-r2b4-p1 e3f2-r2c4-p1 polarizing (with msr function) fixed sensitivity pre-wired 0.1 - 4 m (*3) (*3) with reflector e39-r1s e3f2-r4b4f e3f2-r4c4f m12 connector e3f2-r4b4f-p1 e3f2-r4c4f-p1 adjustable sensitivity pre-wired e3f2-r4b4 e3f2-r4c4 m12 connector E3F2-R4B4-P1 e3f2-r4c4-p1 non-polarizing (without msr function) radial pre-wired 0.1 - 2 m (*2) ?? m12 connector ? ? polarizing (with msr function) pre-wired e3f2-r2rb41 e3f2-r2rc41 m12 connector e3f2-r2rb41-p1 e3f2-r2rc41-p1 diffuse reflective fixed sensitivity wide-beam characteristics axial pre-wired 0.1 m e3f2-ds10b4-n e3f2-ds10c4-n m12 connector e3f2-ds10b4-p1 e3f2-ds10c4-p1 adjustable sensitivity pre-wired 0.3 m e3f2-ds30b4 e3f2-ds30c4 m12 connector e3f2-ds30b4-p1 e3f2-ds30c4-p1 pre-wired 1 m e3f2-d1b4 e3f2-d1c4 m12 connector e3f2-d1b4-p1 e3f2-d1c4-p1 fixed sensitivity wide-beam characteristics radial pre-wired 0.1 m ?? m12 connector ? ? adjustable sensitivity pre-wired 0.3 m e3f2-ds30b41 e3f2-ds30c41 m12 connector e3f2-ds30b41-p1 e3f2-ds30c41-p1 background suppression fixed sensing distance axial pre-wired 10 cm e3f2-ls10b4 e3f2-ls10c4 m12 connector e3f2-ls10b4-p1 e3f2-ls10c4-p1
photoelectric sensor e3f2 3 housing material: metal (nickel plated brass) note: standard cable length is 2 m. models provided with a 5 m long cable are available. when ordering, specify the cable length by adding the length of the cable (e.g. e3f2-r2rb4-m 2m or e3f2-r2rb4-m 5m). for other cable length please contact your omron sales representative. sensing method appearance connection method sensing distance model pnp output npn output through- beam multi purpose axial pre-wired 7 m e3f2-7b4-m e3f2-7c4-m m12 connector e3f2-7b4-m1-m e3f2-7c4-m1-m - precision detection - test input pre-wired 10 m e3f2-10b4-m e3f2-10c4-m m12 connector e3f2-10b4-m 1-m e3f2-10c4-m 1-m retro- reflective (incl. reflector e39-r1) non-polarizing (without msr function) axial pre-wired 0.1 - 2 m (*1) (*1) with reflector e39-r1 ?? m12 connector ? ? polarizing (with msr function) fixed sensivity pre-wired e3f2-r2rb4-m e3f2-r2rc4-m m12 connector e3f2-r2rb4-m1-m e3f2-r2rc4-m1-m pre-wired 0.1 - 4 m (*2) (*2) with reflector e39-r1s e3f2-r4b4f-m e3f2-r4c4f-m m12 connector e3f2-r4b4f-m1-m e3f2-r4c4f-m1-m adjustable sensivity pre-wired e3f2-r4b4-m e3f2-r4c4-m m12 connector e3f2-r4b4-m1-m e3f2-r4c4-m1-m non-polarizing (without msr function) radial pre-wired 0.1 - 2 m (*1) ?? m12 connector ? ? polarizing (with msr function) pre-wired e3f2-r2rb41-m e3f2-r2rc41-m m12 connector e3f2-r2rb41-m1-m e3f2-r2rc41-m1-m diffuse reflective fixed sensing distance wide-beam characteristics axial pre-wired 0.1 m e3f2-ds10b4-m e3f2-ds10c4-m m12 connector e3f2-ds10b4-m1-m e3f2-ds10c4-m1-m adjustable sensing distance pre-wired 0.3 m e3f2-ds30b4-m e3f2-ds30c4-m m12 connector e3f2-ds30b4-m1-m e3f2-ds30c4-m1-m pre-wired 1 m e3f2-d1b4-m e3f2-d1c4-m m12 connector e3f2-d1b4-m1-m e3f2-d1c4-m1-m fixed sensing distance wide-beam characteristics radial pre-wired 0.1 m ?? m12 connector ? ? adjustable sensing distance pre-wired 0.3 m e3f2-ds30b41-m e3f2-ds30c41-m m12 connector e3f2-ds30b41-m1-m e3f2-ds30c41-m1-m background suppression fixed sensing distance axial pre-wired 10 cm e3f2-ls10b4-m e3f2-ls10c4-m m12 connector e3f2-ls10b4-m1-m e3f2-ls10c4-m1-m
4 photoelectric sensor e3f2 housing material: metal (stainless steel) note: standard cable length is 2 m. models provided with a 5 m long cable are available. when ordering, specify the cable length by adding the length of the cable (e.g. e3f2-r2rb4-s 2m or e3f2-r2rb4-s 5m). for other c able length please contact your omron sales representative. ac-switching models housing material: plastic note: standard cable length is 2 m. models provided with a 5 m long cable are available. when ordering, specify the cable length by adding the length of the cable (e.g. e3f2-r2z1 2m or e3f2-r2z1 5m). for other cable l ength please contact your omron sales representative. sensing method appearance connection sensing model method distance pnp output npn output through- beam pre-wired 7 m e3f2-7b4-s e3f2-7c4-s axial m12 connector e3f2-7b4-m1-s e3f2-7c4-m1-s retro- reflective (incl. reflector e39-r1) non-polarizing (without msr function) axial pre-wired 0.1 - 2 m (with reflector e39-r1) ?? m12 connector ? ? polarizing (with msr function) pre-wired e3f2-r2rb4-s e3f2-r2rc4-s m12 connector e3f2-r2rb4-m1-s e3f2-r2rc4-m1-s non-polarizing (without msr function) radial pre-wired ? ? m12 connector ? ? polarizing (with msr function) pre-wired ? ? m12 connector ? ? diffuse reflective fixed sensitivity wide-beam characteristics axial pre-wired 0.1 m e3f2-ds10b4-s e3f2-ds10c4-s m12 connector e3f2-ds10b4-m1-s e3f2-ds10c4-m1-s adjustable sensitivity pre-wired 0.3 m e3f2-ds30b4-s e3f2-ds30c4-s m12 connector e3f2-ds30b4-m1-s e3f2-ds30c4-m1-s fixed sensitivity wide-beam characteristics radial pre-wired 0.1 m ?? m12 connector ? ? adjustable sensitivity pre-wired 0.3 m ?? m12 connector ? ? background suppression please contact your omron sales representative for these models sensing method appearance connection sensing model method distance light-on dark-on through- beam pre-wired 3 m e3f2-3z1 e3f2-3z2 axial retro- reflective (incl. reflector e39-r1) non-polarizing (without msr function) axial pre-wired 0.1 - 2 m (with reflector e39-r1) e3f2-r2z1 e3f2-r2z2 diffuse reflective fixed sensing distance wide-beam characteristics axial pre-wired 0.1 m e3f2-ds10z1-n e3f2-ds10z2-n
photoelectric sensor e3f2 5 accessories (order separately) for detailed information about accessories, refer to the main chapter ?accessories? at the end of the document. note: 1 . typical sensing distance corresponds to 80 % of the max. sensing distance. for details, please refer to ?engineering dat a?. sensor i/o connectors name sensing distance (typical) [1.] model remark reflectors 0.1 - 3.7 m (axial) 0.1 - 2.4 m (radial) e39-r1 60 x 40 mm (included in some models) 0.1 - 4.3 m (axial) e39-r1s for e3f2-r4 0.1 - 4.2 m (axial) 0.1 - 2.7 m (radial) e39-r7 84 mm 0.1 - 5.3 m (axial) 0.1 - 3.1 m (radial) e39-r8 100 x 100 mm 0.1 - 4.3 m (axial) e39-r40 80 x 80 mm tape reflectors e39-rsa 35 x 10 mm e39-rsb 35 x 40 mm e39-rs3 80 x 70 mm lens cap e39-f31 mounting bracket y92e-b18 screw mount y92e-g18 quick access mounting slit e39-es18 for e3f2-10 @ - precision detection cord shape cable type model standard straight 2 m four-wire type xs2f-d421-d80-a 5 m xs2f-d421-g80-a l-shaped 2 m xs2f-d422-d80-a 5 m xs2f-d422-g80-a vibration-proof robot cable straight 2 m xs2f-d421-d80-r 5 m xs2f-d421-g80-r l-shaped 2 m xs2f-d422-d80-r 5 m xs2f-d422-g80-r
6 photoelectric sensor e3f2 ordering information: type list dc-switching models, plastic model sensing method, sensing distance appearance connection (cable-length) control output comments e3f2-7b4 2m through-beam, 7 m axial pre-wired (2 m)* pnp receiver and emitter e3f2-7b4-p1 through-beam, 7 m axial connector pnp receiver and emitter e3f2-7c4 2m through-beam, 7 m axial pre-wired (2 m)* npn receiver and emitter e3f2-7c4-p1 through-beam, 7 m axial connector npn receiver and emitter e3f2-7db4 2m through-beam, 7 m axial pre-wired (2 m)* pnp receiver only e3f2-7db4-p1 through-beam, 7 m axial connector pnp receiver only e3f2-7dc4 2m through-beam, 7 m axial pre-wired (2 m)* npn receiver only e3f2-7dc4-p1 through-beam, 7 m axial connector npn receiver only e3f2-7l 2m through-beam, 7 m axial pre-wired (2 m)* n.a. emitter only e3f2-7l -p1 through-beam, 7 m axial connector n.a. emitter only e3f2-10b4 2m through-beam, 10m axial pre-wired (2m)* pnp receiver and emitter (precision detection and test input) e3f2-10b4-p1 through-beam, 10m axial connector pnp receiver and emitter (precision detection and test input) e3f2-10db4 2m through-beam, 10m axial pre-wired (2m)* pnp receiver only (precision detection and test input) e3f2-10db4-p1 through-beam, 10m axial connector pnp receiver only (precision detection and test input) e3f2-10c4 2m through-beam, 10m axial pre-wired (2m)* npn receiver and emitter (precision detection and test input) e3f2-10c4-p1 through-beam, 10m axial connector npn receiver and emitter (precision detection and test input) e3f2-10dc4 2m through-beam, 10m axial pre-wired (2m)* npn receiver only (precision detection and test input) e3f2-10dc4-p1 through-beam, 10m axial connector npn receiver only (precision detection and test input) e3f2-10lb 2m through-beam, 10m axial pre-wired (2m)* pnp emitter only (precision detection and test input) e3f2-10lb-p1 through-beam, 10m axial connector pnp emitter only (precision detection and test input) e3f2-ds10b4-n 2m diffuse reflective, 0.1 m axi al pre-wired (2 m)* pnp wide-beam characteristic e3f2-ds10b4-p1 diffuse reflective, 0.1 m axial connector pnp wide-beam characteristic e3f2-ds10c4-n 2m diffuse reflective, 0.1 m axi al pre-wired (2 m)* npn wide-beam characteristic e3f2-ds10c4-p1 diffuse reflective, 0.1 m axial connector npn wide-beam characteristic e3f2-ds30b4 2m diffuse reflective, 0.3 m axi al pre-wired (2 m)* pnp sensitivity adjuster e3f2-ds30b41 2m diffuse reflective, 0.3 m radi al pre-wired (2 m)* pnp sensitivity adjuster e3f2-ds30b41-p1 diffuse reflective, 0.3 m radial connector pnp sensitivity adjuster e3f2-ds30b4-p1 diffuse reflective, 0.3 m axial connector pnp sensitivity adjuster e3f2-ds30c4 2m diffuse reflective, 0.3 m axi al pre-wired (2 m)* npn sensitivity adjuster e3f2-ds30c41 2m diffuse reflective, 0.3 m radi al pre-wired (2 m)* npn sensitivity adjuster e3f2-ds30c41-p1 diffuse reflective, 0.3 m radial connector npn sensitivity adjuster e3f2-ds30c4-p1 diffuse reflective, 0.3 m axial connector npn sensitivity adjuster e3f2-d1b4 2m diffuse reflective, 1 m axial pre-wired (2 m)* pnp sensitivity adjuster e3f2-d1b4-p1 diffuse reflective, 1 m a xial connector pnp sensitivity adjuster e3f2-d1c4 2m diffuse reflective, 1 m axial pre-wired (2 m)* npn sensitivity adjuster e3f2-d1c4-p1 diffuse reflective, 1 m a xial connector npn sensitivity adjuster e3f2-ls10b4 2m background suppression, 10 cm axial pre-wired (2 m)* pnp background suppression e3f2-ls10b4-p1 background suppression, 10 cm axial connector pnp background suppression e3f2-ls10c4 2m background suppression, 10 cm axial pre-wired (2 m)* npn background suppression e3f2-ls10c4-p1 background suppression, 10 cm axial connector npn background suppression e3f2-r2b4 2m retroreflective, 2 m axi al pre-wired (2 m)* pnp non-polarizing e3f2-r2b4-e 2m retroreflective, 2 m axial pre-wir ed (2 m)* pnp non-polarizing, without reflector e3f2-r2b4-p1 retroreflective, 2 m axial connector pnp non-polarizing e3f2-r2b4-p1-e retroreflective, 2 m axial co nnector pnp non-polarizing, without reflector e3f2-r2c4 2m retroreflective, 2 m axi al pre-wired (2 m)* npn non-polarizing e3f2-r2c4-e 2m retroreflective, 2 m axial pre-wir ed (2 m)* npn non-polarizing, without reflector e3f2-r2c4-p1 retroreflective, 2 m axial connector npn non-polarizing
photoelectric sensor e3f2 7 * standard cable length is 2 m. models provided with a 5 m long c able are available. when ordering, specify the cable length by adding the length of the cable (e.g. e3f2-r2rb41 2m or e3f2-r2rb41 5m). for other cable length please contact your omron sales representative. dc-switching models, metal (nickel plated brass) e3f2-r2c4-p1-e retroreflective, 2 m axial c onnector npn non-polarizing, without reflector e3f2-r2rb41 2m retroreflective, 2 m r adial pre-wired (2 m)* pnp polarizing e3f2-r2rb41-e 2m retroreflective, 2 m radial pre- wired (2 m)* pnp polarizing, without reflector e3f2-r2rb41-p1 retroreflective, 2 m radial connector pnp polarizing e3f2-r2rb41-p1-e retroreflective, 2 m radial connector pnp polarizing, without reflector e3f2-r2rc41 2m retroreflective, 2 m r adial pre-wired (2 m)* npn polarizing e3f2-r2rc41-e 2m retroreflective, 2 m radial pre- wired (2 m)* npn polarizing, without reflector e3f2-r2rc41-p1 retroreflective, 2 m radial connector npn polarizing e3f2-r2rc41-p1-e retroreflective, 2 m radial connector npn polarizing, without reflector e3f2-r4b4 2m retroreflective, 4m axial pre-wir ed (2m)* pnp polarizing, sensitivity adjuster e3f2-r4b4-e 2m retroreflective, 4m axial pre-wired (2m) * pnp polarizing, sensitivit y adjuster, w/o reflector e3f2-r4b4f 2m retroreflective, 4m axial pre-w ired (2m)* pnp polarizing, fixed sensitivity e3f2-r4b4f-e 2m retroreflective, 4m axial pre-wired (2 m)* pnp polarizing, fixed s ensitivity w/o reflector e3f2-r4c4 2m retroreflective, 4m axial pre-wir ed (2m)* npn polarizing, sensitivity adjuster e3f2-r4c4-e 2m retroreflective, 4m axial pre-wired (2m) * npn polarizing, sensitivit y adjuster, w/o reflector e3f2-r4c4f 2m retroreflective, 4m axial pre-w ired (2m)* npn polarizing, fixed sensitivity e3f2-r4c4f-e 2m retroreflective, 4m axial pre-wired (2 m)* npn polarizing, fixed s ensitivity w/o reflector E3F2-R4B4-P1 retroreflective, 4m axial connec tor pnp polarizing, s ensitivity adjuster E3F2-R4B4-P1-e retroreflective, 4m axial connector pnp polarizing, sensitivity adjuster, w/o reflector e3f2-r4b4f-p1 retroreflective, 4m axial c onnector pnp polarizing, fixed sensitivity e3f2-r4b4f-p1-e retroreflective, 4m axial connector p np polarizing, fixed sensitivity w/o reflector e3f2-r4c4-p1 retroreflective, 4m axial connec tor npn polarizing, s ensitivity adjuster e3f2-r4c4-p1-e retroreflective, 4m axial connector npn polarizing, sensitivity adjuster, w/o reflector e3f2-r4c4f-p1 retroreflective, 4m axial c onnector npn polarizing, fixed sensitivity e3f2-r4c4f-p1-e retroreflective, 4m axial connector n pn polarizing, fixed sensitivity w/o reflector model sensing method, sensing range appearance connection (cable-length) control output comments e3f2-7b4-m 2m through-beam, 7 m axial pre- wired (2 m)* pnp receiver and emitter e3f2-7b4-m1-m through-beam, 7 m axial connector pnp receiver and emitter e3f2-7c4-m 2m through-beam, 7 m axial pre- wired (2 m)* npn receiver and emitter e3f2-7c4-m1-m through-beam, 7 m axial connector npn receiver and emitter e3f2-7db4-m 2m through-beam, 7 m axial pr e-wired (2 m)* pnp receiver only e3f2-7db4-m1-m through-beam, 7 m a xial connector pnp receiver only e3f2-7dc4-m 2m through-beam, 7 m axial pr e-wired (2 m)* npn receiver only e3f2-7dc4-m1-m through-beam, 7 m axial connector npn receiver only e3f2-7l-m 2m through-beam, 7 m axial pr e-wired (2 m)* n.a emitter only e3f2-7l-m1-m through-beam, 7 m a xial connector n.a emitter only e3f2-10b4-m 2m through-beam, 10m axial pre-wired (2m)* pnp receiver and emitter (precision detection and test input) e3f2-10b4-m1-m through-beam, 10m axial connector pnp receiver and emitter (precision detection and test input) e3f2-10db4-m 2m through-beam, 10m axial pre-wired (2m)* pnp receiver only (precision detection and test input) e3f2-10db4-m1-m through-beam, 10m axial connector pnp receiver only (precision detection and test input) e3f2-10c4-m 2m through-beam, 10m axial pre-wired (2m)* npn receiver and emitter (precision detection and test input) e3f2-10c4-m1-m through-beam, 10m axial connector npn receiver and emitter (precision detection and test input) e3f2-10dc4-m 2m through-beam, 10m axial pre-wired (2m)* npn receiver only (precision detection and test input) e3f2-10dc4-m1-m through-beam, 10m axial connector npn receiver only (precision detection and test input) e3f2-10lb-m 2m through-beam, 10m axial pre-wired (2m)* pnp emitter only (precision detection and test input) model sensing method, sensing distance appearance connection (cable-length) control output comments
8 photoelectric sensor e3f2 e3f2-10lb-m 2m through-beam, 10m axial pre-wired (2m)* pnp emitter only (precision detection and test input) e3f2-10lb-m1-m through-beam, 10m axial connector pnp emitter only (precision detection and test input) e3f2-ds10b4-m 2m diffuse reflective, 0.1 m axi al pre-wired (2 m)* pnp wide-beam characteristic e3f2-ds10b4-m1-m diffuse reflective, 0.1 m axial connector pnp wide-beam characteristic e3f2-ds10c4-m 2m diffuse reflective, 0.1 m axi al pre-wired (2 m)* npn wide-beam characteristic e3f2-ds10c4-m1-m diffuse reflective, 0.1 m axial connector npn wide-beam characteristic e3f2-ds30b41-m 2m diffuse reflective, 0.3 m radi al pre-wired (2 m)* pnp sensitivity adjuster e3f2-ds30b41-m1-m diffuse reflective, 0. 3 m radial connector pnp sensitivity adjuster e3f2-ds30b4-m 2m diffuse reflective, 0.3 m axi al pre-wired (2 m)* pnp sensitivity adjuster e3f2-ds30b4-m1-m diffuse reflective, 0. 3 m axial connector pnp sensitivity adjuster e3f2-ds30c41-m 2m diffuse reflective, 0.3 m radi al pre-wired (2 m)* npn sensitivity adjuster e3f2-ds30c41-m1-m diffuse reflective, 0. 3 m radial connector npn sensitivity adjuster e3f2-ds30c4-m 2m diffuse reflective, 0.3 m axi al pre-wired (2 m)* npn sensitivity adjuster e3f2-ds30c4-m1-m diffuse reflective, 0. 3 m axial connector npn sensitivity adjuster e3f2-d1b4-m 2m diffuse reflective, 1 m axi al pre-wired (2m)* pnp sensitivity adjuster e3f2-d1b4-m1-m diffuse reflective, 1 m axial connector pnp sensitivity adjuster e3f2-d1c4-m 2m diffuse reflective, 1 m axi al pre-wired (2m)* npn sensitivity adjuster e3f2-d1c4-m1-m diffuse reflective, 1 m axial connector npn sensitivity adjuster e3f2-ls10b4-m 2m background suppression, 10 cm axial pre-wired (2m)* pnp background suppression e3f2-ls10b4-m1-m background suppression, 10 cm axial connector pnp background suppression e3f2-ls10c4-m 2m background suppression, 10 cm axial pre-wired (2m)* npn background suppression e3f2-ls10c4-m1-m background suppression, 10 cm axial connector npn background suppression e3f2-r2rb41-m 2m retroreflective, 2 m radial pre-wired (2 m)* pnp polarizing e3f2-r2rb41-m1-m retroreflective, 2 m radial connector pnp polarizing e3f2-r2rb41-m1-m-e retroreflective, 2 m radi al connector pnp polarizing, without reflector e3f2-r2rb41-m-e 2m retroreflective, 2 m radial pre- wired (2 m)* pnp polarizing, without reflector e3f2-r2rb4-m 2m retroreflective, 2 m axial pre-wired (2 m)* pnp polarizing e3f2-r2rb4-m1-m retroreflective , 2 m axial connector pnp polarizing e3f2-r2rb4-m1-m-e retroreflective, 2 m axial connector pnp polarizing, without reflector e3f2-r2rb4-m-e 2m retroreflective, 2 m axial pre- wired (2 m)* pnp polarizing, without reflector e3f2-r2rc41-m 2m retroreflective, 2 m radial pre-wired (2 m)* npn polarizing e3f2-r2rc41-m1-m retroreflective, 2 m radial connector npn polarizing e3f2-r2rc41-m1-m-e retroreflective, 2 m radi al connector npn polarizing, without reflector e3f2-r2rc41-m-e 2m retroreflective, 2 m radial pre- wired (2 m)* npn polarizing, without reflector e3f2-r2rc4-m 2m retroreflective, 2 m axial pre-wired (2 m)* npn polarizing e3f2-r2rc4-m1-m retroreflective , 2 m axial connector npn polarizing e3f2-r2rc4-m1-m-e retroreflective, 2 m axial connector npn polarizing, without reflector e3f2-r2rc4-m-e 2m retroreflective, 2 m axial pre- wired (2 m)* npn polarizing, without reflector e3f2-r4b4-m 2m retroreflective, 4m axial pre-w ired (2m)* pnp polarizing, sensitivity adjuster e3f2-r4b4-m-e 2m retroreflective, 4m axial pre-wired (2m) * pnp polarizing, sensitivit y adjuster, w/o reflector e3f2-r4b4f-m 2m retroreflective, 4m axial pre -wired (2m)* pnp polarizi ng, fixed sensitivity e3f2-r4b4f-m-e 2m retroreflective, 4m axial pre-wired (2m)* pnp polarizing, fixed sensitivity w/o reflector e3f2-r4c4-m 2m retroreflective, 4m axial pre-w ired (2m)* npn polarizing, sensitivity adjuster e3f2-r4c4-m-e 2m retroreflective, 4m axial pre-wired (2m) * npn polarizing, sensitivit y adjuster, w/o reflector e3f2-r4c4f-m 2m retroreflective, 4m axial pre -wired (2m)* npn polarizi ng, fixed sensitivity e3f2-r4c4f-m-e 2m retroreflective, 4m axial pre-wired (2m)* npn polarizing, fixed sensitivity w/o reflector e3f2-r4b4-m1-m retroreflective, 4m axial co nnector pnp polarizing, sensitivity adjuster e3f2-r4b4-m1-m-e retroreflective, 4m axial connector p np polarizing, sensitivity adjuster, w/o reflector e3f2-r4b4f-m1-m retroreflective, 4m axial c onnector pnp polarizing, fixed sensitivity e3f2-r4b4f-m1-m-e retroreflective, 4m axial connecto r pnp polarizing, fixed sensitivity w/o reflector e3f2-r4c4-m1-m retroreflective, 4m axial co nnector npn polarizing, sensitivity adjuster e3f2-r4c4-m1-m-e retroreflective, 4m axial connector n pn polarizing, sensitivity adjuster, w/o reflector e3f2-r4c4f-m1-m retroreflective, 4m axial c onnector npn polarizing, fixed sensitivity model sensing method, sensing range appearance connection (cable-length) control output comments
photoelectric sensor e3f2 9 * standard cable length is 2 m. models provided with a 5 m long c able are available. when ordering, specify the cable length by adding the length of the cable (e.g. e3f2-r2rb41-m 2m or e3f2-r2rb41-m 5m). for other c able length please contact your omron sales representative. dc-switching models, metal (stainless steel) * standard cable length is 2 m. models provided with a 5 m long ca ble are available. when ordering, specify the cable length by adding the length of the cable (e.g. e3f2-r2rb41-s 2m or e3f2-r2rb41-s 5m). for other cabl e length please contact your omron sales representative. ac-switching models, plastic * standard cable length is 2 m. models provided with a 5 m long ca ble are available. when ordering, specify the cable length by adding the length of the cable (e.g. e3f2-r2z1 2m or e3f2-r2z1 5m). for other cable length please contact your omron sales representative. e3f2-r4c4f-m1-m-e retroreflective, 4m axial connector n pn polarizing, fixed sensitivity w/o reflector model sensing method, sensing range appearance connection (cable-length) control output comments e3f2-7b4-m1-s through-beam, 7 m axial connector pnp receiver and emitter e3f2-7b4-s 2m through-beam, 7 m axial pre- wired (2 m)* pnp receiver and emitter e3f2-7c4-m1-s through-beam, 7 m axial connector npn receiver and emitter e3f2-7c4-s 2m through-beam, 7 m axial pre- wired (2 m)* npn receiver and emitter e3f2-7db4-m1-s through-beam, 7 m a xial connector pnp receiver only e3f2-7db4-s 2m through-beam, 7 m axial pr e-wired (2 m)* pnp receiver only e3f2-7dc4-m1-s through-beam, 7 m axial connector npn receiver only e3f2-7dc4-s 2m through-beam, 7 m axial pr e-wired (2 m)* npn receiver only e3f2-7l-m1-s through-beam, 7 m a xial connector n.a. emitter only e3f2-7l-s 2m through-beam, 7 m axial pr e-wired (2 m)* n.a. emitter only e3f2-ds10b4-m1-s diffuse reflective, 0.1 m axial connector pnp wide-beam characteristic e3f2-ds10b4-s 2m diffuse reflective, 0.1 m axi al pre-wired (2 m)* pnp wide-beam characteristic e3f2-ds10c4-m1-s diffuse reflective, 0.1 m axial connector npn wide-beam characteristic e3f2-ds10c4-s 2m diffuse reflective, 0.1 m axi al pre-wired (2 m)* npn wide-beam characteristic e3f2-ds30b4-m1-s diffuse reflective, 0. 3 m axial connector pnp sensitivity adjuster e3f2-ds30b4-s 2m diffuse reflective, 0.3 m axi al pre-wired (2 m)* pnp sensitivity adjuster e3f2-ds30c4-m1-s diffuse reflective, 0. 3 m axial connector npn sensitivity adjuster e3f2-ds30c4-s 2m diffuse reflective, 0.3 m axi al pre-wired (2 m)* npn sensitivity adjuster e3f2-r2rb4-m1-s retroreflective, 2 m axial connector pnp polarizing e3f2-r2rb4-m1-s-e retroreflective, 2 m axial connector pnp polarizing, without reflector e3f2-r2rb4-s 2m retroreflective, 2 m axial pre-wired (2 m)* pnp polarizing e3f2-r2rb4-s-e 2m retroreflective, 2 m axial pre- wired (2 m)* pnp polarizing, without reflector e3f2-r2rc4-m1-s retroreflective , 2 m axial connector npn polarizing e3f2-r2rc4-m1-s-e retroreflective, 2 m axial connector npn polarizing, without reflector e3f2-r2rc4-s 2m retroreflective, 2 m axial pre-wired (2 m)* npn polarizing e3f2-r2rc4-s-e 2m retroreflective, 2 m axial pre- wired (2 m)* npn polarizing, without reflector model sensing method, sensing range appearance connection (cable-length) control output comments e3f2-3lz 2m through-beam, 3 m axial pr e-wired (2 m)* n.a. emitter only e3f2-3dz1 2m through-beam, 3 m axial pre- wired (2 m)* light-on receiver only e3f2-3dz2 2m through-beam, 3 m axial pre- wired (2 m)* dark-on receiver only e3f2-3z1 2m through-beam, 3 m axial pre-wir ed (2 m)* light-on receiver and emitter e3f2-3z2 2m through-beam, 3 m axial pre-wir ed (2 m)* dark-on receiver and emitter e3f2-r2z1 2m retroreflective, 2 m axial pre-wired (2 m)* li ght-on non-polarizing e3f2-r2z2 2m retroreflective, 2 m axial pre-wired (2 m)* dar k-on non-polarizing e3f2-r2z1-e 2m retroreflective, 2 m axial pre-wir ed (2 m)* light-on non-polariz ing, without reflector e3f2-r2z2-e 2m retroreflective, 2 m axial pre-wir ed (2 m)* dark-on non-polariz ing, without reflector e3f2-ds10z1-n 2m diffuse reflective, 0.1 m axial pr e-wired (2 m)* light-on w ide-beam characteristic e3f2-ds10z2-n 2m diffuse reflective, 0.1 m axial pre-wired (2 m)* dark-on wide-beam characteristic model sensing method, sensing range appearance connection (cable-length) control output comments
10 photoelectric sensor e3f2 specifications ratings / characteristics of dc switching models note: 1 . for stable sensing distance in detail, please refer to ?engineering data? 2 . typical sensing distance corresponds to 80 % of the max. sensing distance. 3 . the enclosure rating ip67 of omron internal standards corres pond to stricter test requirements than the standard iec 60529 (r efer to chapter ?precautions?) 4 . for other cable materials (e.g. pur) please contact your omron sales representative. 5 . material-specification for stainless st eel housing case: 1.4305 (w.-no.), 303 (aisi), 2346 (ss). for other stainless steel ma terials please contact your omron sales representative. 6 . please contact your omron sales representative for the availability of stainless steel bgs types. 7 . with slit e39-es18 8 . pnp models -b4: vcc to vcc -2.5 v: emitting off (source current: 3 ma max.) / open or 0 to 2.5 v: emitting on (leakage curren t: 0.1 ma max.) npn models -c4: 0 to 2.5 v: emitting off (source current: 3 ma max.) / open or vcc to vcc -2.5 v: emitting on (leakage current: 0.1 ma max.) item e3f2-7 # e3f2-10 # e3f2-r2 # 4- # e3f2-r2r # e3f2-r4 # - # e3f2-ds10 # e3f2-ds30 # e3f2- d1 # 4- # e3f2- ls10 # 4- # sensing method through-beam retroreflective diffuse reflective - multi purpose - precision detection [7.] - test input non- polarizing polarizing wide beam characteristic adjustable sensing distance background suppression power supply voltage 10 to 30 v dc 12 to 24 v dc 10 to 30 v dc current consumption 50 ma max. 25 ma max. 30 ma max. 25 ma max. 30 ma max. rated sensing distance [1.] 7 m 10 m 0.1 - 2 m (with reflector e39-r1) 0.1 - 4 m (with reflector e39-r1s) 0.1 m (5 x 5 cm white mat paper) 0.3 m (10 x 10 cm white mat paper) 1 m (30 x 30 cm white mat paper) 0.1 m (10 x 10 cm white mat paper) typical sensing distance for different reflector types (ref. to accesso- ries) [2.] ? e39-r1: 4.0 m e39-r7: 4.5 m e39-r8: 5.3 m e39-r1: axial 3.7 m radial 2.4 m e39-r7: axial 4.2 m radial 2.7 m e39-r8: axial 5.3 m radial 3.1 m e39-r1s: 4.3 m e39-r7: 4.8 m e39-r8: 5.6 m e39-r40: 4.3 m e39-rs3: 2 m ? standard object opaque: 11 mm dia. min. opaque: 56 mm dia. min. ? directional angle 3 to 20 ? differential travel (hysteresis) ? 20% max. 5% max black/white error ? 3% response time operation and reset: 2.5 ms max. 1 ms max 2.5 ms max. 1 ms max. control output transistor (open collector), load current: 100 ma max. (residual voltage: 2 v max.) power reset time 50 ms 100 ms max. 50 ms 100 ms ambient illumination incandescent lamp:3000 lx max. / sunlight:10000 lx max. ambient temperature operating: -25 to 55 c / stora ge: -30 to 70 c (with no icing or condensation) ambient humidity operating: 35% to 85% / storage: 35% to 95% (without condensation) insulation resistance 20 m min. at 500 v dc between energized parts and case dielectric strength 1000 vac max., 50 / 60 hz for 1 min between energized parts and case vibration resistance 10 to 55 hz, 1.5 mm double amplitude for 2 hrs each direction (x, y, z) shock resistance destruction: 500 m/s 2 each direction (x, y, z) enclosure ratings ip67 [3.]; nema 1, 2, 4 light source infrared led (880 nm/850 nm) red led (660 nm) infrared led (880 nm) red led (660 nm) indicators light incident / power indica- tor for light source (red) output (orange) / light emission (red) light incident / power indicator for light source (red) light incident (red) / stability (green) light incident / power indica- tor for light source (red) light incident (red) / stability (green) output indicator (orange) / stability (green) sensitivity adjustment fixed fixed / adjustable fixed adjustable fixed connection method 2 m, 5 m pre-wired cable (pvc , dia. 4 mm (18 / 0.12) [4.]) or m12-connector test input ? [8.] ? operation mode light-on or dark-on selectable by wiring weight (approx.) plastic case pre-wired (2 m) 120 g 60 g connector 40 g 20 g metal case pre-wired (2 m) 180 g 90 g connector 120 g 50 g circuit protection output short-circ uit and power supply reverse polarity housing materials plastic (case: abs; lens: pmma) nickel brass nickel brass ? nickel brass nickel brass nickel brass nickel brass nickel brass nickel brass stainless steel [5.] ?? stainless steel [5.] ? stainless steel [5.] stainless steel [5.] ? ? [6.]
photoelectric sensor e3f2 11 ratings / characteristics of ac switching models note: 1 . for stable sensing distance in detail, please refer to ?engineering data? 2 . typical sensing distance corresponds to 80 % of the max. sensing distance. 3 . the enclosure rating ip67 of omron internal standards correspond to stricter test requirements than the standard iec 60529 (r efer to chapter ?precautions?) 4 . for other cable materials (e.g. pur) pleas e contact your omron sales representative. item e3f2-3z1 e3f2-3z2 e3f2-r2z1 e3f2-r2z2 e3f2-ds10z1 e3f2-ds10z2 sensing method through-beam non- polarizing retroreflective diffuse reflective (wide-beam characteristic) power supply voltage 24 to 240 vac 10 %, 50 / 60 hz current consumption 10 ma max. 5 ma max. rated sensing distance[1.] 3 m 0.1 - 2 m (with reflector e39-r1) 0.1 m (5 x 5 cm white mat paper) typical sensing distance for dif- ferent reflector types [2.] ? e39-r1: 3,4 m e39-r7: 3,9 m e39-r8: 5,2 m ? detectable object opaque object: 11 mm min. opaque object: 56 mm min. opaque objects directional angle 3 to 20 ? differential travel ? 20 % max. response time 30 ms max. control output ac solid state (scr) 200 ma max.; residual voltage: 5 v max. at 200 ma power reset time 100 ms ambient illumination incandescent la mp: 3000 lx max. sunlight: 10000 lx max. ambient temperature [5.] operating: -25 to 55 c / storage: -30 to 70 c (with no icing or condensation) ambient humidity operating: 35% to 85% / storage: 35% to 95% (without condensation) insulation resistance 20 m min. at 500 v dc between energized parts and case dielectric strength 1500 vac, 50 / 60 hz for 1 min between energized parts and case vibration resistance 10 to 55 hz, 1.5 mm double amplitude for 2 hrs each direction (x, y, z) shock resistance 500 m/sqr (approx. 50 g) for each direction (x, y, z) enclosure rating ip67 [3.]; nema 1, 2, 4 light source infrared led (880 nm) indicators light incident/power i ndicator for light source (red) sensitivity adjustment fixed connection method 2 m, 5 m pre-wired cable (pvc dia. 4 mm (14 / 0.15) [4.]) operation mode light-o n or dark-on (fixed) circuit protection none weight (approx.) 110 g (pre-wired 2 m cable) housing materials plastic (case: abs; lens: pmma)
12 photoelectric sensor e3f2 engineering data (typical) operating range (typical) through-beam models (axial) e3f2-7 # 4- # through-beam models (axial) e3f2-3z # through-beam models (axial) e3f2-10 # retroreflective models (axial) e3f2-r2 # 4- # (non polarizing) and reflectors retroreflective models (axial) e3f2-r2z # (non polarizing) and reflectors retroreflective models (axial) e3f2-r2r # 4- # (polarizing) and reflectors retro-reflective models (axial) e3f2-r4 # 4 # - # (polarizing) retroreflective models (radial) e3f2-r2r # 41- # (polarizing) and reflectors 12345 0 0 100 200 300 ?100 ?200 ?300 distance y (mm) distance x (m) typical sensing distance: 3.8 m x y -500 -400 -300 -200 -100 0 100 200 300 400 500 0 1 2 3 4 5 6 7 8 9 10 11 1213 1415 16 17 distance x (m) distance y (mm) x y 123456 0 0 100 200 300 ?100 ?200 ?300 distance y (mm) distance x (m) 8 7 typical sensing distances: e39-r1: 4.0 m e39-r7: 4.5 m e39-r8: 5.3 m x y reflector 123456 0 0 100 200 300 ?100 ?200 ?300 distance y (mm) distance x (m) 8 7 typical sensing distances: e39-r1: 3.4 m e39-r7: 3.9 m e39-r8: 5.2 m x y reflector 12 34 56 0 0 50 100 150 200 ?50 ?100 ?150 ?200 distance y (mm) distance x (m) x y reflector 7 typical sensing distances: e39-r1: 3.7 m e39-r7: 4.2 m e39-r8: 5.3 m 0 01 23456 789 distance x (m) - 250 - 200 - 150 - 100 -50 50 100 150 200 250 distance y (mm) x y reflector typical sensing distance e39-rs3 e39-r1s e39-r40 e39-r7 e39-r8 0.5 1 1.5 2 2.5 3 0 0 50 100 ?50 ?100 distance y (mm) distance x (m) 4 3.5 typical sensing distances: e39-r1: 2.4 m e39-r7: 2.7 m e39-r8: 3.1 m x y reflector
photoelectric sensor e3f2 13 excess gain ratio vs. distance (typical) diffuse reflective models (axial) e3f2-ds10 # 4- # (wide-beam type) diffuse reflective models (axial) e3f2-ds10z- # (wide-beam type) diffuse reflective models (axial) e3f2-ds30 # 4- # diffuse reflective models (radial) e3f2-ds30 # 41- # diffuse reflective models (axial) e3f2-d1 # 4- # through-beam models (axial) e3f2-7 # 4- # through-beam models (axial) e3f2-3z # through-beam models (axial) e3f2-10 # 20 40 60 80 100 120 0 0 5 10 15 ?5 ?10 ?15 distance y (mm) distance x (mm) 140 white paper (50 x 50 mm) x y object 20 40 60 80 100 120 0 0 10 20 30 ?10 ?20 ?30 distance y (mm) distance x (mm) 140 white paper (50 x 50 mm) x y object 100 200 300 400 500 600 0 0 10 20 30 40 ?10 ?20 ?30 ?40 distance y (mm) distance x (mm) sensing distance adjustable between 0 and 550 mm sensitivity adjusted to maximum sensitivity adjusted to 400 mm white paper (100 x 100 mm) x y object 100 200 300 400 500 0 0 10 20 30 40 ?10 ?20 ?30 ?40 distance y (mm) distance x (mm) sensitivity adjusted to 390 mm white paper (90% reflectivity) sensing object: 100 x 100 mm x y object 100 80 60 40 20 0 -20 -40 -60 -80 -100 0 200 400 600 800 1000 1200 1400 1600 distance x (mm) distance y (mm) sensing object: 300 x 300 mm x y object 2 4 6 8 10 12 0 100 10 1 0.1 excess gain distance x (m) 1 2345 6 0 100 10 1 0.1 excess gain distance x (m) 7 1 10 100 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 distance [m] relative gain
14 photoelectric sensor e3f2 retroreflective models (axial) e3f2-r2 # 4- # (non polarizing) and reflectors retroreflective models (axial) e3f2-r2z # (non polarizing) and reflectors retroreflective models (axial) e3f2-r2r # 4- # (polarizing) and reflectors retroreflective models (axial) e3f2-r4 # 4 # - # retroreflective models (radial) e3f2-r2r # 41- # (polarizing) and reflectors diffuse reflective models (axial) e3f2-ds10 # 4- # (wide-beam type) diffuse reflective models (axial) e3f2-ds10z- # (wide-beam type) diffuse reflective models (axial) e3f2-ds30 # 4- # 123456 0 100 10 1 0.1 excess gain distance x (m) 7 8 reflector e39-r7 reflector e39-r1 reflector e39-r8 1 2345 6 0 100 10 1 0.1 excess gain distance x (m) 7 reflector e39-r1 reflector e39-r7 reflector e39-r8 1 2345 6 0 100 10 1 0.1 excess gain distance x (m) 7 reflector e39-r1 reflector e39-r7 reflector e39-r8 0.1 1 10 100 02 4 6 810 distance x (m) excess gain reflectors: e39-rs3 e39-r1s e39-r40 e39-r7 e39-r8 12345 0 100 10 1 0.1 excess gain distance x (m) reflector e39-r1 reflector e39-r7 reflector e39-r8 20 40 60 80 100 120 0 100 10 1 0.1 excess gain distance x (mm) 140 grey paper (18% reflectivity) sensing object: 50 x 50 mm white paper (90% reflectivity) 50 100 150 0 100 10 1 0.1 excess gain distance x (mm) 200 grey paper (18% reflectivity) sensing object: 50 x 50 mm white paper (90% reflectivity) 200 400 600 800 1000 0 100 10 1 0.1 excess gain distance x (mm) grey paper (18% reflectivity) white paper (90% reflectivity) sensitivity adjusted to maximum sensing object: 100 x 100 mm
photoelectric sensor e3f2 15 diffuse reflective models (radial) e3f2-ds30 # 41- # diffuse reflective models (axial) e3f2-d1 # 4- # light spot vs sensing distance incline (left and right) incline (up and down) background suppression models e3f2-ls # background suppression models e3f2-ls # background suppression models e3f2-ls # object material vs sensing distance background suppression models e3f2-ls # 100 200 300 400 500 0 100 10 1 0.1 excess gain distance x (mm) grey paper (18% reflectivity) sensing object: 100 x 100 mm white paper (90% reflectivity) sensitivity adjusted to 390 mm 0,1 1 10 100 distance(m) excess gain 0 0.5 1 1.5 2 0 2 4 6 050100150 distance(mm) spot diameter(mm) -20,00% -10,00% 0,00% 10,00% 20,00% -40 -30 -20 -10 0 10 20 30 40 incline angle (?) sensing distence movement (%) -20,00% -10,00% 0,00% 10,00% 20,00% -40 -30 -20 -10 0 10 20 30 40 incline angle (?) sensing distence movement (%) 0,0 20,0 40,0 60,0 80,0 100,0 120,0 white corrugated paper black sus mirror sensing distance(mm)
16 photoelectric sensor e3f2 operation output circuits structure of sensor i/o connector pnp output classification wire color connector pin no. use dc brown ? power supply (+v) white ? mode selection lon/don blue ? power supply (0 v) black ? output model output transistor status timing chart connection method output circuit e3f2- @ b4- @ (except for e3f2-10b4- @ and e3f2-ls10b4- @ ) ?? ? through-beam emitter on when light is incident. (light-on) connect the pink (pin ? ) and brown (pin ? ) cords or open the pink cord (pin ? ). on when light is interrupted. (dark- on) connect the pink (pin ? ) and blue (pin ? ) cords. 1 2 3 4 brown white blue black xs2f-d42 # -d80- # xs2f-g42 # -g80- # main circuit 1 2 3 4 1 3 connector pin arrangement 10 to 30 vdc 0 v brown blue power indicator (red) incident interrupted on off on off operate release output indicator (red) output transistor load (relay) light indicator red main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d z d : v z = 36 v stability indicator* green * only on models e3f2-r4b4- @ and e3f2-d1b4- @ incident interrupted on off on off operate release output indicator (red) output transistor load (relay) light indicator red main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v stability indicator* green * only on models e3f2-r4b4- @ and e3f2-d1b4- @
photoelectric sensor e3f2 17 note: terminal numbers for connector type. e3f2-10b4- @ ?? through-beam emitter on when light is incident. (light-on) connect the pink (pin ? ) and brown (pin ? ) cords or open the pink cord (pin ? ). on when light is interrupted. (dark- on) connect the pink (pin ? ) and blue (pin ? ) cords. e3f2-ls10b4- @ on when light is incident. (light-on) connect the pink (pin ? ) and brown (pin ? ) cords or open the pink cord (pin ? ). on when light is interrupted. (dark- on) connect the pink (pin ? ) and blue (pin ? ) cords. model output transistor status timing chart connection method output circuit on off on off on off te s t input light emission indicator red incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) output indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v z d incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) output indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) output indicator stability indicator* orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d z d : v z = 36 v green incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) output indicator stability indicator* orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v green
18 photoelectric sensor e3f2 npn output model output transistor status timing chart connection method output circuit e3f2- @ c4- @ (except for e3f2-10c4- @ and e3f2-ls10c4- @ ) ?? through-beam emitter on when light is incident. (light-on) connect the pink (pin ? ) and brown (pin ? ) cords or open the pink cord (pin ? ). on when light is interrupted. (dark- on) connect the pink (pin ? ) and blue (pin ? ) cords. e3f2-10c4- @ ?? through-beam emitter on when light is incident. (light-on) connect the pink (pin ? ) and brown (pin ? ) cords or open the pink cord (pin ? ). on when light is interrupted. (dark- on) connect the pink (pin ? ) and blue (pin ? ) cords. main circuit 1 2 3 4 1 3 connector pin arrangement 10 to 30 vdc 0 v brown blue power indicator (red) incident interrupted on off on off operate release output indicator (red) output transistor load (relay) output indicator red main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v stability indicator* green * only on models e3f2-r4c4- @ and e3f2-d1c4- @ incident interrupted on off on off operate release output indicator (red) output transistor load (relay) output indicator red main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v stability indicator* green * only on models e3f2-r4c4- @ and e3f2-d1c4- @ on off on off on off te s t input light emission indicator red incident interrupted on off on off operate release output indicator (red) output transistor load (relay) light indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) light indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v
photoelectric sensor e3f2 19 note: terminal numbers for connector type. ac output e3f2-ls10c4- @ on when light is incident. (light-on) connect the pink (pin ? ) and brown (pin ? ) cords or open the pink cord (pin ? ). on when light is interrupted. (dark- on) connect the pink (pin ? ) and blue (pin ? ) cords. model output transistor status timing chart connection method output circuit e3f2-3lz ? ? ? through-beam emitter e3f2-3z1 e3f2-r2z1 e3f2-ds10z1-n on when light is incident. (light-on) ? e3f2-3z2 e3f2-r2z2 e3f2-ds10z2-n on when light is interrupted. (dark- on) ? model output transistor status timing chart connection method output circuit incident interrupted on off on off operate release output indicator (red) output transistor load (relay) output indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v stability indicator* green incident interrupted on off on off operate release output indicator (orange) output transistor load (relay) output indicator orange main circuit 1 2 3 4 1 2 3 4 connector pin arrangement 10 to 30 vdc 100 ma max. load 0 v mode selection brown black blue pink z d : v z = 36 v stability indicator* green main circuit 24 to 240 vac brown blue power indicator (red) incident interrupted on off on off operate release output indicator (red) output transistor load (relay) light indicator red main circuit 200 ma max. load brown black blue 24 to 240 vac incident interrupted on off on off operate release output indicator (red) output transistor load (relay)
20 photoelectric sensor e3f2 dimensions note: all units are in millimeters unless otherwise indicated dc-switching models, plastic, axial type cable type connector type without potentiometer e3f2-7 # e3f2-10 # e3f2-r2 # 4 e3f2-ds10 # 4-n e3f2-ls10 # 4 e3f2-r4 # 4f e3f2-7 # -p1 e3f2-10 # ?p1 e3f2-r2 # 4-p1 e3f2-ds10 # 4-p1 e3f2-ls10 # 4-p1 e3f2-r4 # 4f-p1 with potentiometer e3f2-ds30 # 4 e3f2-d1 # 4 e3f2-ds30 # 4-p1 e3f2-d1 # 4-p1 4.8 dia 37 42.3 64.9 m18x1 6g light indicator 5 4 8 16.4 dia 6.2 22 24 4 dia optical area 5 4 8 m18x1 6g light indicator 4.7 dia 42.3 37 m12x1 6g 16.6 dia 73 6.2 22 24 62 optical area 37 42.3 49.3 m18x1 6g light indicator sensitivity adjustor 5 4 8 16.4 dia 4.8 dia 6.2 22 24 64.9 4 dia optical area 5 4 8 m18x1 6g sensitivity adjustor light indicator 4.7 dia 49.3 42.3 37 m12x1 6g 16.6 dia 73 6.2 22 24 62 optical area
photoelectric sensor e3f2 21 dc-switching models, plastic, radial type cable type connector type without potentiometer e3f2-r2r # 41 e3f2-r2r # 41-p1 with potentiometer e3f2-ds30 # 41 e3f2-ds30 # 41-p1 37 42.3 64.9 m18x1 6g light indicator 5 4 8 16.4 dia 4.8 dia 4 dia 6.9 3.45 24 22 optical area 13.2 5 4 8 m18x1 6g light indicator 4.7 dia 42.3 37 m12x1 6g 16.6 dia 73 62 6.9 optical area 24 13.2 22 3.45 37 42.3 49.3 m18x1 6g light indicator sensitivity adjustor 5 4 8 16.4 dia 4.8 dia 64.9 4 dia 6.9 optical area 24 22 3.45 13.2 5 4 8 m18x1 6g sensitivity adjustor light indicator 4.7 dia 49.3 42.3 37 m12x1 6g 16.6 dia 73 62 6.9 optical area 24 13.2 3.45 22
22 photoelectric sensor e3f2 dc-switching models, metal (brass and stainless steel), axial type cable type connector type without potentiometer e3f2-7 # -m e3f2-7 # -s e3f2-10 # -m e3f2-r2r # 4-m e3f2-r2r # 4-s e3f2-ds10 # 4-m e3f2-ds10 # 4-s e3f2-ls10 # 4-m e3f2-r4 # 4f-m e3f2-7 # -m1-m e3f2-7 # -m1-s e3f2-10 # -m1-m e3f2-r2r # 4-m1-m e3f2-r2r # 4-m1-s e3f2-ds10 # 4-m1-m e3f2-ds10 # 4-m1-s e3f2-ls10 # 4-m1-m e3f2-r4 # 4f-m1-m with potentiometer e3f2-ds30 # 4-m e3f2-ds30 # 4-s e3f2-r4 # 4-m e3f2-d1 # 4-m e3f2-ds30 # 4-m1-m e3f2-ds30 # 4-m1-s e3f2-r4 # 4-m1-m e3f2-d1 # 4-m1-m 4.8 dia 37 42.3 64.9 light indicator 16.4 dia 4 dia 4 m18x1 6g 24 27.7 6.2 optical area 37 42.3 light indicator 4.8 dia 76 16.4 dia m12x1 6g 4 m18x1 6g 24 27.7 6.2 65.5 optical area 37 42.3 49.3 64.9 light indicator sensitivity adjustor 4.8 dia 16.4 dia 4 dia 4 m18x1 6g 24 27.7 6.2 optical area 37 42.3 49.3 light indicator sensitivity adjustor 4.8 dia 16.4 dia m12x1 6g 4 m18x1 6g 76 65.5 24 27.7 6.2 optical area
photoelectric sensor e3f2 23 dc-switching models, metal (brass and stainless steel), radial type ac-switching models, plastic, axial type cable type connector type without potentiometer e3f2-r2r # 41-m e3f2-r2r # 41-s e3f2-r2r # 41-m1 e3f2-r2r # 41-m1-s with potentiometer e3f2-ds30 # 41-m e3f2-ds30 # 41-s e3f2-ds30 # 41-m1-m e3f2-ds30 # 41-m1-s cable type without potentiometer e3f2-3z # e3f2-r2z # e3f2-ds10z # -n 4.8 dia 37 42.3 64.9 light indicator 16.4 dia 4 dia 4 m18x1 6g 24 27.7 6.2 optical area 37 42.3 light indicator 4.8 dia 76 16.4 dia m12x1.6g 4 m18x1.6g 65.5 6.9 24 27.7 3.45 13.2 optical area 37 42.3 49.3 64.9 light indicator sensitivity adjustor 4.8 dia 16.4 dia 4 dia 4 m18x1 6g 6.9 optical area 24 3.45 27.7 13.2 37 42.3 49.3 light indicator sensitivity adjustor 4.8 dia 16.4 dia m12x1 6g 4 m18x1 6g 76 65.5 6.9 optical area 24 13.2 27.7 3.45 16.8 dia. 24 3.1 optical zone 22 90 67.3 62 m18 x 1 6g 5 dia. 8 3.1 light indicator
24 photoelectric sensor e3f2 accessories (order separately) reflectors e39-r1 e39-r1s e39-r3 e39-r7 e39-r8 e39-r40 tape reflectors e39-rs3 e39-rsa e39-rsb material, reflective surface: acrylic rear surface: abs 34 40.3 52 59.9 2.7 8 1.6 7.5 7 two, 3.5 dia. 29 4.5 6 r20 3.4 7 18.45 22.9 11 20 0.2 0.2 16 22.5 19.3 34 38 34.8 2-m3 41.8 10.1 1.2 25.4 r25.4 3.4 10? 1.2 2.6 stainless steel (sus304) adhesive tape side two, 3.2 dia. 13.7 14? 3.4 material, reflective surface: acrylic rear surface: abs 4.5 84 7.4 f for m3 for m3 9 100 100 92 92 for m3 8.7 84.5 84.5 77 77 80 4-r1 70 0.6 adhesive tape side 35 10 0.7 adhesive tape reflecting surface 4 x r1 40 35 0.7 adhesive tape reflecting surface 4 x r1
photoelectric sensor e3f2 25 installation mounting bracket y92e-b18 note: hexagon bolt: m5 x 32 material: plastic lens cap e39-f31 mounting bracket y92e-g18 slit (for precision detection with e3f2-10 @ ) e39-es18 20 dia. 4 max. metal rim gasket e3f2 glass plate approx. 35 23.5 20.5 5 30 two tightening nuts 30 m24x1.5 sensor tightening nut 30 30 16 1 21 4
26 photoelectric sensor e3f2 precautions the e3f2 photoelectric sensor is not a safety component for ensur- ing the safety of people which is defined in ec directive (91/368/ eec) and covered by separate european standards or by any other regulations or standards. degree of protection the e3f2 photoelectric sensors have a degree of protection rated with ip67. in this case, the sensors have passed the omron heat shock test before the ip67-test of iec 60529 (submersion at 1m water depth for 30 min). afterwards the sensors have been tested according to the omron waterproof test. heat shock: alternating, fast temperature changes between -25c and +55c are executed for 5 cycles and 1 hour for each temperature. function and isolation are checked. water proof: the sensors are submerged alternating in water of +2c and +55c. 20 cycles with 1 hour for each tem- perature are executed. func tion, water tightness and electrical isolation are checked. do not expose the photoelectric sensor to excessive shock during installation, keeping within ip 67 standards. wiring i f the input/output lines of the phot oelectric sensor are placed in the same conduit or duct as power lines or high-voltage lines, the photo- electric sensor could be induced to malfunction, or even be damaged by electrical noise. separate the wiring, or use shielded lines as input/output lines to the photoelectric sensor. do not connect the black wire to the brown wire without a load. direct connection of these wires may damage the photoelectric sensor (ac switching type). when using the photoelectric sensor in the vicinity of an inverter motor, ensure to connect the protective earth ground wire of the motor to earth. failure to ground the motor may result in malfunction of the sensor. when you use the photoelectric sens or at temperatures exceeding 45c, the load current must be within the described values as shown in the figure below. installation do not exceed a torque of 2.0 nm ( 20 kgf cm) when tightening mounting nuts for plastic mod- els 20.0 nm (200 kgf cm) when tightening mounting nuts for metal mod- els black brown blue load sensor 24 to 240 vac operating temperature ( ?c) 200 130 55 45 0 load current (ma)
photoelectric sensor e3f2 27
28 photoelectric sensor e3f2 in the interest of product improvement, specifi cations are subject to change without notice. cat. no. e224-e2-02 omron europe b.v. wegalaan 67-69, nl-2132 jd, hoofddorp, the netherlands phone: +31 23 568 13 00 fax: +31 23 568 13 88 www.eu.omron.com

▲Up To Search▲

Price & Availability of E3F2-R4B4-P1

	To Download E3F2-R4B4-P1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .